Table of Contents
Advertisement
Programmable functions
Airways indicator
Fluff should be removed after drying.
In addition, this indicator will remind
you to clean the filters when a certain
amount of fluff has collected in them:
You can decide at what level of fluff
this reminder should be given.
You will have an idea of how often this
should be done after a few drying pro-
grammes.
Options
= Off
does not light up. However,
if there is a very severe block-
age in the ducting, the pro-
gramme will be cancelled and
the error message will
appear in the display regardless
of this option.
= Heavy
lights up when there is a
heavy build-up of fluff.
= Normal (factory default setting)
= Light
lights up when there is only
a small build-up of fluff.
78
Backlight brightness
dimmed
The brightness of the dimmed sensors
in the control field can be set to one of
seven different levels.
The brightness changes as soon as you
select a different setting.
Selection
= Darkest level
= Factory default setting
...
= Brightest level
Factory default
The programmable functions are reset
to the factory default settings.
= The factory default is set
= Reset the programmable func-
tions to the factory default set-
tings
Advertisement
Table of Contents
