Buzzer is active
The buzzer sounds to let you know the
programme has finished. It can be
switched on or off.
The continuous tone which sounds
when there are error messages is inde-
pendent of the buzzer.
Options
= Off
= On (factory setting)
Airways indicator
Fluff should be removed after drying.
In addition, this indicator will remind
you to clean the filters when a certain
amount of fluff has collected in them:
You can decide at what level of fluff
this reminder should be given.
You will have an idea of how often this
should be done after a few drying pro-
grammes.
Options
= Off
does not light up. However,
if there is a very severe block-
age in the ducting, the pro-
gramme will be cancelled and
the error message will
appear in the display regard-
less of this option.
= Heavy
lights up when there is a
heavy build-up of fluff.
= Normal (factory default set-
ting)
= Light
lights up when there is only
a small build-up of fluff.
Programmable functions
Backlight brightness
The brightness of the dimmed sensors
in the control panel can be selected at
seven different levels.
The brightness changes as soon as you
select a different setting.
Options
= darkest level
= Factory default setting
...
= brightest level
79