Condensed Water Container; Emptying The Condensed Water Container - Miele TEC 665 WP Operating Instructions Manual

Heat-pump dryer
Table of Contents

Advertisement

Condensed water container

Emptying the condensed water
container
The condensed water is collected in
the condensed water container.
Empty the condensed water con-
tainer after every drying programme.
The  indicator will light up if the max-
imum level of the condensed water con-
tainer is reached.
To delete the  indicator: open and
close the door with the dryer switched
on.
Damage to the door and the fas-
cia panel when removing the con-
densed water container.
The door and the fascia panel can
sustain damage.
Always close the door completely.
 Remove the condensed water con-
tainer.
 To prevent water from running out,
keep it in a horizontal position when
carrying it. Hold the condensed water
container by the front panel and at the
back.
36
 Empty the condensed water con-
tainer.
 Replace the condensed water con-
tainer in the dryer.
Condensed water can cause health
problems in people and animals.
Do not drink condensed water.
Condensed water can be put to house-
hold use (e.g. used in a steam iron or
humidifier). To ensure that any residual
particles of fluff in the condensed water
are removed before use, pass it through
a fine sieve or paper filter first.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tec665wp 125 edition

Table of Contents