Smeg F170P Manual page 9

Description of controls
Cooking start: as well as setting a cooking duration time, the user can
also set the cooking start time (up to 12 hours after the current time). To
set the cooking start/end time, proceed as follows.
- Set the cooking duration time as described in the previous point.
- Within 6/7 seconds after the last time the
press the key to set the cooking start time. The display will show the
current time with the inside segments indicating the cooking end time
illuminated. Use the
- 6/7 seconds after the last time a key is pressed, the display will show the
current time and the cooking start and end times, indicated by the
illuminated inside segments.
constantly on until the current time is the same as the cooking start time;
as soon as the current time reaches the cooking start time set, all the
inside segments will start to flash, indicating that the oven has started
cooking.
- When the end of the cooking time is reached, the timer will switch off the
oven heating elements, the beeps will start and the numbers on the dial
will flash.
- To reset the entire program set, keep the central key
2 seconds if cooking has already started the oven will have to be
:
switched off by hand.
- The image on
programming: the current time is 7.06 and cooking is
programmed to start at 8 o'clock and finish at 9.
- At 8 o'clock, the inside segments between 8 and 9 will
start to flash and the hour pointer will remain still.
Caution: for the oven to start cooking after the programming
procedure just described, the thermostat and function selector must
be properly set on the temperature and function required.
and keys to set the cooking start time.
The segments on the display will be
the right shows an
or keys are pressed,
pressed for 1 or
example of
33