Smeg DOSC36X Instructions For Use Manual page 21

Instructions for the user
7.2.4 End of cooking
This function allows, as well as setting a cooking duration, a cooking end time to
be set (with a maximum delay of 24 hours in relation to the current time).
• Rotate the oven thermostat knob to the desired temperature
• Rotate the oven function knob to the desired function
• Set the cooking duration as described in the previous point ("Cooking
duration");
• Press and the sum of the current time plus the preset cooking time will
appear on the display.
• Press the value modification buttons
setting by one minute for each pressure until reaching the desired time;
• Wait about 5 seconds without pushing any buttons to start the function;
• The current time and the A symbol will be shown on the display;
• Press to view the remaining time;
• Press to view the cooking end time;
• At the end of the cooking operation the timer will deactivate the oven heating
elements and the buzzer will sound. The numbers on the dial will flash;
• To silence the buzzer at the end of the time, press
manually switching off the oven if a cooking operation is in progress.
The set programming can be reset by pressing
duration will be cancelled and the oven must be turned off manually if a cooking
operation is in progress.
7.2.5 Modifying the set data
The set cooking data can be modified at any time by pressing the function button
and then pressing the buttons
or to increase or decrease the
or to change the value.
and proceed with
. By doing this the set
67