Smeg DOSC36X Instructions For Use Manual page 18

7.2 Digital clock (on some models only)
THE ELECTRONIC PROGRAMMER ONLY CONTROLS THE LARGE OVEN
AND HAS NO CONTROL OVER THE SMALL OVEN
7.2.1 Setting the time
When the oven is used for the first time, or after an interruption in the electricity
supply, the display flashes at regular intervals.
To set the time proceed as follows:
• Press
• Press the value modification buttons
setting by one minute for each pressure until reaching the desired time;
• Wait about 5 seconds without pressing any buttons. The dot between the
hour and minute digits will stop flashing.
64
Instructions for the user
. The dot between the hour and minute digits will flash and the
symbol will appear;
FUNCTION KEY LIST
TIMER BUTTON
END OF COOKING BUTTON
COOKING DURATION
BUTTON
VALUE DECREASE BUTTON
VALUE INCREASE BUTTON
MANUAL MODE BUTTON
or to increase or decrease the