Synchro-Recording With A Sony Cd Player - Sony MDS-302 Operating Instructions Manual

10
Recording on MDs
i a ge eT
Synchro-Recording With a Sony
CD Player
By connecting your recorder to a Sony CD player or
Hi-Fi Component System, you can easily dub CDs onto
MDs using the CD synchro buttons on the remote. If
your recorder is connected to a Sony CD player by the
optical cable through DIGITAL IN (digital input),
tracks are automatically recorded in the same sequence
as the original regardless of whether "LevelSync ON"
or "LevelSyncOFF" is selected. If your recorder is
connected to a Sony CD player by audio connecting
cords through LINE IN (analog input), tracks are
automatically recorded when you select "LevelSync
ON" (see "Marking Track Numbers While Recording"
on page 9).
As the same remote controls both the CD player and
the recorder, you may have trouble operating both
units if they are far from each other. If you do, place
the CD player close to this recorder.
STOP
START
STANDBY
CD PLAYER fl
1 Set the source selector on the amplifier to CD.
2 Do Steps 2 to 5 in "Recording on an MD" on page 6
to prepare the recorder for recording.
Insert a CD into the CD player.
4 Select the playback mode (shuffle play, program
play, etc.) on the CD player.
9 Press STANDBY.
The CD player pauses for playing and the recorder
pauses for recording.
6 Press START.
The recorder starts recording and the CD player
starts playback.
The track number and elapsed recording time of the
track appear in the display.
If the CD player does not start playing
Some CD player models may not respond when you press
START on the remote of the recorder. Press fl on the
remote of the CD player instead.
7 Press STOP to stop synchro-recording.
To pause recording
Press STANDBY or CD PLAYER II.
To restart recording, press START or CD PLAYER II.
A new track number is created each time you pause recording.
¢ You can use the remote of the CD player during
synchro-recording
Press W.
The CD player stops and the recorder pauses for
recording.
To restart synchro-recording, press B,
¢ You can change CDs during synchro-recording
Do the following steps instead of Step 7 above.
1 Press W on the remote of the CD player.
The recorder pauses for recording.
2 Change the CD.
3 Press œ on the remote of the CD player.
Synchro-recording restarts.
¢ You can check the remaining recordable time on the
MD
Press DISPLAY (see page 8).