Locating A Specific Track; Locating A Particular Point In A Track "00.0 - Sony MDS-302 Operating Instructions Manual

14
Playing MDs
Locating a Specific Track
You can quickly locate any track while playing a disc
by using AMS (Automatic Music Sensor), Kk and
>P, number buttons or M.SCAN on the remote.
Number
buttons
M.SCAN
wml tej
To locate Do the following:
The next or
succeeding tracks
Turn AMS clockwise or press >>I
repeatedly until you find the track
The current or
preceding tracks
Turn AMS counterclockwise or press
<4 repeatedly until you find the
track
Press number buttons to enter the
A specific track
track number
directly
1 Press M.SCAN before you start
playing.
2 When you find the track you want,
press > to start playing.
By scanning each
track for 6 seconds
(music scan)
To pause playing at the beginning of a track
Turn AMS (or press kK or PI) after pausing playback.
To go quickly to the beginning of the last track
Turn AMS counterclockwise (or press K@<@) while the display
shows the total track number and total disc playing time (see
page 13).
¢ When you directly locate a track with a number over
25
You must press >25 first, before entering the
corresponding digits.
Press >25 once if it is a 2-digit track number, and twice if it
is a 3-digit track number.
To enter "0," press button 10.
Examples: ¢ To play track number 30
Press >25 once, then 3 and 10.
e To play track number 100
Press >25 twice, then 1, 10 and 10.
Q You can extend the playing time during music scan
While the recorder is stopped, press M.SCAN repeatedly
until the playing time you want (6, 10 or 20 seconds)
appears in the display. Each press changes the time in
order of 6 to 20, then from 6 again.
Track
You can also use <4 and >P to locate a particular
point in a track while playing an MD or during
playback pause.
To locate a point Press
While monitoring the PP (forward) or 44 (backward)
sound and keep pressing until you find
the point
Quickly by observing PP or 44 and keep pressing until
the display during you find the point. There is no
playback pause sound output during this
operation.
Notes
° Ifthe disc reaches the end while you are pressing B® during
playback pause, "OVER" appears in the display. Press <<
(or K€) or turn AMS counterclockwise to go back.
If the disc reaches the end while you are pressing > during
sound monitoring, the recorder stops.
Tracks that are only a few seconds long may be too short to
scan using the search function. For such tracks, it is better to
play the MD at normal speed.