Table of Contents
Advertisement
Switching the appliance on/off
When you connect the appliance to the power mains for the first time, the appliance will be in standby
mode (switched off, but powered).
Adjusting the temperature in the appliance
INFORMATION!
•
Appliance temperature is preset at the factory to the recommended setting, i.e. 4°C for the
refrigerator compartment and -18°C for the freezer compartment.
•
After the appliance is switched on, it may take several hours until the set temperature is
reached. Do not place any food into the refrigerator before the temperature drops to the
selected setting.
•
Refrigerator compartment temperature can be set in the range from +1°C to 9°C.
•
Each time one of the B1 keys is pressed, the temperature is increased or decreased by 1°C. Three
seconds after the most recent key is pressed, the current setting is automatically stored as the
most recent temperature setting for the refrigerator compartment of the appliance.
•
Recommended temperature setting is 4°C.
Switching on the appliance: to switch on the appliance, press the A
key. A beep will be sounded and temperature display will appear on the
display units B and C.
Switching off the appliance: to switch off the appliance, press the A
key and hold it for a while (2 seconds). A beep will be sounded again
and the outer segments of the display digits B will light up in the
clockwise succession. The appliance is in standby mode (it is still
powered).
Use the B1 keys to set the temperature in the refrigerator compartment.
+ Increase temperature
- Decrease temperature
Use the C1 keys to set the temperature in the freezer compartment.
+ Increase temperature
- Decrease temperature
21
Advertisement
Table of Contents
