Table of Contents
Advertisement
Removing the Stand and Mounting the Display
Refer to the table below for the standard dimensions for mounting kits.
NOTE: For use only with a UL certified mounting kit/bracket. To obtain a wall
mounting kit or height adjustment base, contact ViewSonic® or your
local dealer.
Maximum
Hole pattern
Loading
(W x H)
14 kg
100 x 100 mm
NOTE: Mounting kits are sold separately.
1. Turn off the device and disconnect all cables.
2. Place the device on a flat, stable surface with the screen facing down.
3. Remove the monitor stand.
1
4. Attach the mounting bracket to the VESA mounting holes at the rear of the
device. Then secure it with four (4) screws (M4 x 10 mm).
5. Follow the instructions that come with the mounting kit to mount the monitor.
100 mm
DP
HDMI
Interface Pad
(W x H x D)
115 x 115 x 2.6 mm
2
11
Screw
Pad Hole
Specification
Ø 5 mm
M4 x 10 mm
Screw
Quantity
4 screws
Advertisement
Table of Contents
