Removing the Stand and Mounting the Monitor
Refer to the table below for the standard dimensions for mounting kits.
NOTE: For use only with a UL certified mounting kit/bracket. To obtain a wall
mounting kit or height adjustment base, contact ViewSonic® or your
local dealer.
Maximum
Hole pattern
Loading
(W x H)
14 kg
100 x 100 mm
NOTE: Mounting kits are sold separately.
1. Turn off the monitor, disconnect all cables, and remove the remote control.
2. Place the monitor on a flat, stable surface with the screen facing down.
3. Unscrew the captured screw in the monitor stand's base and remove it from the
monitor stand's neck.
4. Press and hold the quick release tab and carefully lift the stand.
Interface Pad
(W x H x D)
N/A
1
2
13
Screw
Pad Hole
Specification
N/A
M4 x 10 mm
Screw
Quantity
4
1