Activating the Tone Squelch (Receiver Quieting)
1.
Press the TSQ button. One beep is heard and the TSQ indicator appears on the
display. UH-088 is now programmed to operate in Quiet Mode.
In this mode, the microphone PTT is disabled until a signal with your Selcall ID is
received.
2.
To deactivate quiet mode, press the TSQ button again. Two beeps are heard and
the TSQ indicator disappears from the display.
Pressing the SELCALL button will also deactivate Quiet Mode.
Receiving Calls when in Quiet Mode
The UH-088 will respond in the same way in Quiet Mode as when it is called while in
normal mode.
20