Programming Scan Channels.16 - Uniden SUNDOWNER UH-088 Owner's Manual

Programming Scan Channels
1. Select which Scanning Mode you
wish to use on the channel.
OS or GS Mode
Note: OS is indicated by the
absence of the GS icon.
2. Select the channel you want to
store.
3. Press and hold MEM lor 1.5 sec. to
store. MEM icon appears and a
short tone beep is heard.
4. To remove the channel from Memory, press and hold MEM for 1.5 sec. once more.
Two successive beeps are heard and the MEM icon disappears.
16