Group Scan (Gs) Mode; Programming Scan Channels - Uniden UH089 Owner's Manual

UNIDEN Model UH-089 FRS CB Radio
Operation

Group Scan (GS) Mode

Allows you to monitor a Priority (Instant) Channel while scanning (Instant Priority channel see p. 11)
To use GS Mode Scanning, press
display.
GS Scanning checks the Instant Priority Channel for activity regularly.
If the Priority Channel becomes active the radio will stay on that channel for as long as the signal is present. If
the received signal ceases, Priority Scanning continues after 3 seconds.
If scanning stops on a channel which is not a Priority Channel, UH-089 will continue monitoring the Priority Channel
for activity while listening to the active one.
To deactivate SCAN, press the
or the PTT button
If SCAN is deactivated while it is tuned to an active channel, the UH-089 will stay on that activechannel.
NOTE
If none of the channels are active, the UH-089 will reinstate the Priority Channel.
If GS Scanning is initiated when there are no channels programmed in GS memory, an error tone
NOTE
will be heard and scanning will not start (see Programming Scan Channels - below).

Programming Scan Channels

Select which Scanning Mode you wish to use
- OS or GS.
Select the channel you want to store.
Press to store. MEM icon appears
MEM
and a short tone beep is heard.
To remove the channel from Memory, press
once more. The MEM icon disappears.
MEM
OS is indicated by the absence of
NOTE
the GS icon.
. GS icon appears on the
OS/GS
button
SCAN
Rotary
Channel
Selector
SLCT
STORE
Rotary
Channel
Selector
SLCT
STORE
9
FM
INST
SCAN MEM
GS
FM
SCAN GS MEM
OS/GS SCAN MEM
FM
SCAN GS MEM
OS/GS
MEM
SCAN
VOX
CTCSS
S/RF VOL
S/RF VOL
S/RF VOL
INST DUP
INST SET
CTCSS
S/RF VOL
INST DUP
INST SET CTCSS