Optoma ZW410UST User Manual page 51

USING THE PROJECTOR
Alert Setup
You can send email alerts when an error occurs. You can carry out settings for alert mail in this
section.
1. Alert types: Check the type of error for which you want to send alert mail.
2. Alert mail notification: Check and perform the following settings:
- SMTP Setting: Set the following:
a) SMTP Server: Server address (server name) (SMTP server)
b) From: e-mail address of the sender
c) User Name: User name of the mail server
d) Password: Mail server password.
- Email Setting: Set the following:
a) Mail Subject
b) Mail Content
c) To: Enter the e-mail address of the sender.
3. Click "Apply" to fix the value.
4. Enter the IP address of projector in *xxx.xxx.xxx.xxx.
5. Send Test Mail.
When you click [Send Test Mail], test email will be sent. The text will be "Email Test xxx.xxx.xxx.xxx *".
51
English