Canon
F.
Training Facilities
1. Online Course Training Facilities
The online courses are located in the Service Training Solutions section of
the
e-Support Center Website
Solutions provide easy access to the training. The online courses can be
conducted at any dealer facility that is suitable for online student learning.
A varioPRINT 6000 TITAN Series device must be available to complete
the labs.
2. Classroom Training Facilities
•
Classroom training is only available in Itasca, Illinois.
•
Irvine, California
G.
Course Equipment
•
Windows workstation (Windows 7, or higher)
•
Microsoft Internet Explorer v11.0 or higher
H.
Service Materials
The materials required for the varioPRINT 6000 TITAN Series Training
program are listed in the table below.
Table 26 - Service Materials
Model
varioPRINT 6000 TITAN
Series
varioPRINT 6000 TITAN Series Service Guide
Revision 1
varioPRINT 6000 TITAN Series Service Guide
. Certification maps on the Service Training
Item
e-Learning Training Program
Technical Service Manual (TSM)
Parts Catalog
Location
Conducted online
Downloadable via Robin & Porthos
(Robin & Porthos Installation and Setup
instructions are available on the
e-Support Center Website)
April 2021
Page 30