Table of Contents
Advertisement
Canon
2. DFS30-N Tape Binder eLearning Course
To service the DFS30-N Tape Binder with the varioPRINT 6000 TITAN
Series machines, service technicians must complete the Finishing
Equipment (DFS-30) Tape Binder online training course.
Table 21 – Additional Accessory Training Courses
Finishing Equipment [DFS-30] Tape Binder Online Training
1
Item Numbers and Part Numbers are subject to change without notice.
3. BLM 550+ Training
a. BLM550+ Learning Path for New Service Technicians
The learning path for a new Technician is a comprehensive blended
learning program, which will prepare the new service technician to
setup and service the BLM550+. The online course module, available
on the Service Training Solutions section of the
provides technicians with the theoretical concepts to install, configure,
and support the BLM550+ Booklet Maker. The 5-day Hardware
classroom courses blends the information taught online with hands-
on, practical training in the classroom and lab.
Table 22 – Required Courses for New Technicians
Plockmatic BLM500/550/550+ Online Training
Plockmatic BLM500/550/550+ Classroom
1
b. Learning Path for BLM500/550 Trained Service Technicians
Service technicians that completed the Plockmatic BLM500/550
Training Program must take the BLM550+ Update course online. See
the Service Training Solutions site for offerings at the Service Training
Solutions section of the
Table 23 – Online Course Module for BLM500/BLM550 Certified
Plockmatic BLM550+ Update Online Training
1
varioPRINT 6000 TITAN Series Service Guide
Revision 1
Module Name
Course Name
Item Numbers and Part Numbers are subject to change without notice.
Technicians
Course Name
Item Numbers and Part Numbers are subject to change without notice.
varioPRINT 6000 TITAN Series Service Guide
e-Support Center Website
1
Course Code
21DDSFEDFS30O
e-Support Center Website
1
Course Code
19DDSBLM500O
19DDSBLM501C
.
1
Course Code
19IPCBLM5P00O
April 2021
Page 28
,
Advertisement
Table of Contents
