Table of Contents
Advertisement
Canon
E.
Estimated Installation Times
The table below indicates the estimated length of time needed to unpack and
install the main unit and optional accessories, calculated from the average
amount of labor hours. The estimated unpack and installation times are based
on a minimum of two (2) experienced technicians unless otherwise specified.
IMPORTANT
Setup time varies due to many factors, most of which the installation technician
has little control over. Some obstacles may include:
•
Forklift availability and its operator
•
Narrow hallways or a need to remove doors to enter rooms
•
Uneven or damaged floors making leveling equipment difficult and time
consuming
With the above-mentioned obstacles considered, an installation of varioPRINT
6000 TITAN Series Main Unit can take longer than the estimated total times
below.
Table 35 – Estimated Installation Times
Main Unit Minimum Configuration
Main Unit Maximum Configuration
BLM550+ Booklet Maker (Including the connecting bridge)
Book Stacker
P2T 2-Knife Trimmer
BGB3202 Perfect Binder
Light Weight Media Kit-A1
63
Minimum Configuration: Main Engine, One PIM, Input Interface Module and One High Capacity Stacker with set Finisher
64
Maximum configuration : Main Engine, Three PIMs, Input Interface Module, One High Capacity Stacker with Finisher, and Two
additional High Capacity Stackers
65
The estimated installation time includes a Canon USA Engineer training two (2) dealer service technicians.
66
The estimated installation time of the Light Weight Media Kit includes installation and adjustment when the air supply is
available at the time of installation.
varioPRINT 6000 TITAN Series Service Guide
Revision 1
varioPRINT 6000 TITAN Series Service Guide
Estimated Installation Times
Description
63
64
65
Estimated
Installation Time
6 hours
12 hours
6 hours
2.5 hours
3 hours
5 days
66
4 Hours
April 2021
Page 40
Advertisement
Table of Contents
