Table of Contents
Advertisement
Canon
E.
Operator Panel
•
High-resolution TFT screen with a unique graphical user interface for end-
user and service technician accessibility
•
View and access job information, manage print jobs, monitor the status of
print jobs, and monitor the status of the varioPRINT.
•
In addition, with the touch of a button the end-user has the ability to stop
the varioPRINT engine or place the engine into a sleep mode.
•
The service technician has access to view and manage system
information.
•
A
Multi-message
messages/alerts followed by other messages.
•
A USB connector is available for direct printing, software installation and
software upgrades.
F.
Print Guard IV
•
Shipped as standard equipment with the Canon varioPRINT 6000 TP
TITAN Series and varioPRINT 6000 MICR TITAN Series devices.
•
Not Supported with the varioPRINT 6000 TITAN (Standard) Series
devices.
•
The Print Guard flattens the toner layer and makes the prints smoother
minimizing toner rub off by providing a combination of heat and pressure.
In addition, prints are covered with a thin layer of silicon oil.
•
Two Print Guards must be used at a time (one for each side).
•
Cannot be installed with the Media Enhancement Module.
varioPRINT 6000 TITAN Series Service Guide
Revision 1
varioPRINT 6000 TITAN Series Service Guide
dashboard
enables
viewing
the
most
import
April 2021
Page 16
Advertisement
Table of Contents
