Cleaning the Print Head Using the Operator Panel
If you want to clean the print head from the operator panel, follow
these steps:
Make sure
the printer is
turned on.
Press and
hold the
RESUME
button for at
least two
seconds until
the printer
N
Perform the print head cleaning only when you encounter a print
quality problem. Unnecessary and repetitious cleaning will waste
ink.
If you execute the print head cleaning while paper is manually
loaded, the printer will eject the paper and then perform the
cleaning.
Chapter 5
Make sure the green
POWER
The
light will blink for several seconds while the
POWER
print head is being cleaned.
light is on.
Maintaining the Printer
5-7