Dishes", Page - Bosch CMG7761 1A Series User Manual And Installation Instructions

en Microwave
¡ Supplied wire rack
In microwave-only operation, sheets and trays, e.g.
the universal pan or the baking tray, may create
sparks and are not suitable.
These materials allow microwaves to pass through and
are not damaged.
Cookware that is not microwave-safe
Note: Observe the specifications for preventing mater-
ial damage.
→ "Microwave", Page 7
¡ Metal cookware and bakeware
Microwaves cannot pass through metal. The food is
barely heated or not heated at all. Metal may create
sparks in microwave-only operation.
Cookware when adding microwave to an operating
mode
If you switch on the microwave for another operating
mode, metal is also an option, in addition to
microwave-safe cookware and accessories:
¡ Metal cookware and bakeware
Metal must be kept at least 2 cm from the cooking
compartment walls and the inside of the door.
Always place metal cookware or bakeware in the
centre of the supplied wire rack.
¡ Accessories supplied:
Wire rack
Universal pan
Baking tray
Testing cookware for microwave suitability
If you are unsure whether your cookware is suitable for
use in the microwave, carry out a cookware test.
ATTENTION!
Operating the appliance without food in the cooking
compartment may lead to overloading.
Do not switch on the microwave unless there is food
▶
inside. The only exception to this rule is when per-
forming a short cookware test.
WARNING ‒ Risk of burns!
The accessible parts of the appliance become hot dur-
ing operation.
Never touch these hot parts.
▶
Keep children at a safe distance.
▶
Place the empty cookware in the cooking compart-
1.
ment.
Set the appliance to run for 30 seconds to 1 minute
2.
at maximum power.
Start the operation.
3.
Check the cookware several times:
4.
If the cookware remains cold or warm to the
‒
touch, it is suitable for microwave use.
18
If the cookware becomes hot or sparks are cre-
‒
ated, stop the cookware test. The cookware is
not microwave-safe.
11.2 Setting options with the microwave
The microwave can be used on its own, or in combina-
tion with a different operating mode.
Microwave-only operation
The electromagnetic waves of the microwave alone
generate energy and this is converted into heat in food,
for example.
To prevent condensation, when the microwave output
is 600 watts and "Boost", the appliance automatically
switches on a heating element. The cooking compart-
ment and the accessories become hot. The cooking
result is not affected by this.
You can switch off this automatic drying function in the
basic settings.
→ "Basic settings", Page 22
WARNING ‒ Risk of burns!
At the highest settings in microwave only mode, the
drying function will automatically switch on an addi-
tional heating element to heat the cooking compart-
ment.
Never touch the inside surfaces of the cooking com-
▶
partment or the heating elements while they are hot.
Keep children at a safe distance.
▶
Added microwave
Adding the microwave to an operating mode reduces
the cooking time.
You can combine the microwave with the following
functions:
¡ Types of heating → Page 15
– 4D hot air
– Top/bottom heating
– Circulated air grilling
– Full-surface grill
– Centre-area grill
¡ → "Dishes", Page 20
¡ → "Ventilation function 'Crisp Finish'", Page 19
Possible microwave outputs combined with an
operating mode include:
¡ 90 watts
¡ 180 watts
¡ 360 watts
11.3 Setting the microwave
Note:
Note the correct way to operate the microwave:
¡ → "Safety", Page 2
¡ → "Preventing material damage", Page 6
¡ → "Microwave output settings", Page 12
¡ → "Cookware and accessories with microwave",
Page 17
Press "Microwave" in the menu.
1.
Or select the microwave directly using the
‒
ton.
Press the microwave output ("Boost").
2.
Use the setting ring to set the microwave output.
3.
To confirm the set microwave output, press
4.
the display.
but-
on