Table of Contents
Advertisement
Swipe down or up to scroll through selection
‒
lists.
To select a function, press the function on the dis-
2.
play.
a Depending on the function, possible setting values
or other tiles are available for selection.
To go back to a setting if necessary, press
3.
To change the setting values, use the digital setting
4.
ring:
Swipe over the setting ring clockwise or anti-
‒
clockwise, as required.
Or press a specific position on the setting ring.
‒
Use
to confirm the setting.
5.
Press
to start the operation.
6.
If the operation is ended:
7.
If required, you can select other settings and re-
‒
start the operation.
When the food is ready, use
‒
pliance off.
Note: You can save your settings as "Favourites"
and use these again.
→ "Favourites", Page 21
8.6 Setting the type of heating and the
temperature
Press "Types of heating" in the menu.
1.
Press the type of heating that you want to use.
2.
Press the temperature in °C or, depending on the
3.
type of heating, the setting.
Use the setting ring to set the temperature.
4.
Press
on the display to confirm the set temperat-
5.
ure.
If required, you can implement additional settings:
– → "Rapid heating", Page 16
– → "Time-setting options", Page 16
– → "Microwave", Page 17
– → "Ventilation function 'Crisp Finish'", Page 19
Press
to start the operation.
6.
a The appliance starts heating.
a The setting values and how long the appliance has
already been in operation are shown on the display.
If the operation is ended:
7.
If required, you can select other settings and re-
‒
start the operation.
When the food is ready, use
‒
pliance off.
Note: The most suitable type of heating for your food
can be found in the description of the type of heating.
→ "Types of heating", Page 11
Changing the type of heating
When you change the type of heating, the other set-
tings are also reset.
Press
.
1.
Press
.
2.
Press the type of heating that you want to use.
3.
Reset the operation and use
4.
Changing the temperature
Once the operation has started, you can change the
temperature at any time.
Press
on the display.
1.
Press the temperature.
2.
Change the temperature with the setting ring.
3.
.
to switch the ap-
to switch the ap-
to start.
To confirm the change, press
4.
a The change is applied.
8.7 Displaying information
In most cases, you can call up information about the
function that you have just started. The appliance auto-
matically displays certain information, e.g. to ask you to
do/confirm something or to issue a warning.
Press
"Info".
1.
a Information is displayed for a few seconds.
To scroll through lots of content in the message,
2.
swipe over the display.
If necessary, use
3.
8.8 Keeping warm over an extended period
You can use your appliance to keep meals warm for up
to 24 hours without changing the behaviour of the ap-
pliance. Use the time functions and change the basic
settings.
Note: If you open the appliance door during operation,
the appliance stops heating. When you close the appli-
ance door, the appliance continues to heat again. To
ensure that the behaviour of the appliance is not
changed during operation, only open the appliance
door once the set time has elapsed.
Change the basic settings.
1.
→ "Basic settings", Page 22
Change the "Lighting" basic setting to "Always
‒
off".
Change the "Standby screen" basic setting to
‒
"On".
Change the "Signal tone" basic setting to "Very
‒
short duration".
a This will ensure that the light in the cooking com-
partment is always off while the appliance is in oper-
ation and when you open the appliance door. The
clock display does not change. The duration of the
signal tone is reduced at the end of the operation.
Set the required operating mode.
2.
→ "Setting the operating mode", Page 14
→ "Setting the type of heating and the temperature",
Page 15
Set the required cooking time depending on the op-
3.
erating mode.
→ "Setting the cooking time", Page 16
→ "Time-setting options", Page 16
Use "End time" to set the time at which the opera-
4.
tion should end.
→ "Setting the end time", Page 16
→ "Time-setting options", Page 16
Place the food in the cooking compartment before
5.
the appliance starts to heat.
Press
to start the operation.
6.
a The display shows the time remaining until the oper-
ation starts. The appliance is in standby mode.
a Once the start time has been reached, the appli-
ance starts heating and the cooking time starts
counting down.
When the operation has ended, remove the food
7.
from the cooking compartment. The appliance auto-
matically switches off completely after approximately
15 to 20 minutes.
Basic operation en
on the display.
to exit the message.
15
Advertisement
Chapters
Table of Contents
