Advertisement
ASSEMBLY PROCEDURE
4.
)
\* 7 K
7
A(DfS § £ ®(D1HS/Adjust the angle of the bass drum.
• *i**2-*'j*f □*y?ur6'5;ayW'i'
SU^fo
£t£££tf<fcU£-f0
• After locking the casters, loosen the wing nut on the lock side, and gently rotate the bass drum.
Once a comfortable playing position has been achieved, hold the bass drum in place and tighten
the wing nut firmly.
« When adjusting the angle of the bass drum, make sure that both fixing plates are in place and firmly
tightened. The bass drum may drop and cause injury if the fixing plates are not properly secured.
Advertisement
