Lincoln Electric 50448 Service Manual page 26

Figure 52
WARNING
The jobs which are disabled can not be using in "Save
memory" function – shown Figure 53 (job 2 is not
available).
Figure 53
Select Jobs for Job Work - it
allows to choose which jobs will be
enable when Job Mode will be
activated.
To select Jobs for Job Work:
Access to the „Configuration" menu.
Use the right knob [33] to highlight the icon "Select Jobs
for Job Mode".
Figure 54
Press right knob [33] to confirm.
Use right knob [33] to highlight the job number.
Press right knob [33] to confirm – the icon of chosen
parameter will appear on the lower part of the display.
Figure 55
Press button [34] to return to main menu.
Enable/ Disable Jobs Mode or
Select Jobs for Jobs Mode – user
has access to operate only with
selected jobs.
WARNING: First of all user have to select jobs which can
be used in Job Mode ( Lock -> Enable/ Disable Jobs Mode
or Select Jobs for Jobs Mode ).
To activate Job Mode:
Access to „Configuration" menu.
Use right knob [33] to highlight the Job Mode icon.
Figure 56
Press right knob [33]. The Job Mode menu is shown on
the display.
Use right knob [33] to highlight one of the option shown on
the figure below.
Cancel Job Mode
Activate Job Mode