Danger
Driving with excessive speed while turning can
cause you to rollover, resulting in serious injury or
death to you or bystanders.
Do not rely on the Smart Turn steering feature
to avoid accidents while turning.
Read, understand, and follow all instructions in
the Operator's Manual and on the machine
before starting.
Maintenance
Recommended Maintenance Schedule
Maintenance Service
Interval
Each Use
25 Hours
50 Hours
100 Hours
Maintenance Procedure
Engine oil—check level
Brakes—check
Safety System—check
Air-intake screens—clean
1
Engine area—clean
Rear transaxle cover—clean
Engine air precleaner—clean
Tires—check pressure
Battery—check electrolyte level
Transaxle—check oil level
Grease fittings—grease
Power take off (PTO) belt—check tension
2
Engine oil—change
Engine air filter—replace
Fuel filter—replace
20
Pushing the Machine by Hand
Important
Do not tow the machine because
transmission damage may occur. Always push the
machine by hand.
1. Disengage the PTO and stop the engine.
2. Move the High-Low range lever to the neutral position
(N).
This allows the rear wheels to turn freely.
3. Push the machine to the desired location.
4. Place the lever high or low after moving the machine,
and set the parking brake.
1
1
1
1