Saeco SM6685/00 User Manual page 14

14
English
Consult the table below for a detailed description of when and how to clean all detachable parts of the
machine. You can find more detailed information and video instructions on www.saeco.com/care. See
figure C for an overview of which parts can be cleaned in the dishwasher.
Item
AquaClean filter
The machine does not automatically detect that a filter has been placed in the water tank. Therefore
you need to activate each new AquaClean filter that you install in the 'Status' menu.
Your machine has to be completely limescale-free before you start using the AquaClean filter.
Replace the AquaClean filter at least every 3 months, even if the machine does not yet indicate that
replacement is required.
Brew group
When you remove the brew group from the machine, make sure to empty the drip tray and the coffee
grounds container.
Before you slide the brew group back into the machine, make sure it is in the correct position.The arrow
on the yellow cylinder on the side of the brew group has to be aligned with the black arrow and N (Fig.
16).
Milk system/internal
cappuccinatore
Milk container
HygieSteam
container (milk tube
holder)
When to clean
When the machine asks you or
every three months.
Weekly
Monthly
After every day of use
Weekly
Monthly
Weekly
Weekly or when the machine
reminds you
How to find in the control panel/
What to do
STATUS->CLEANING->AQUACLEAN. Follow the
steps to activate the AquaClean filter.
STATUS -> PERFORMANCE ->BREW GROUP
CLEAN. Follow the steps to remove and clean
the brew group.
STATUS -> PERFORMANCE ->COFFEE OIL
REMOVAL. Follow the steps of the self-cleaning
process to automatically remove coffee oil
residues from the brew group.
STATUS -> HYGIESTEAM. Follow the steps of
the self-cleaning process to clean the milk
system. Wipe the outside of the metal milk
tube with a damp cloth before placing it into
the milk tube holder.
Remove and disassemble the internal
cappuccinatore. Rinse all parts under the tap
with some washing-up liquid.
STATUS -> HYGIESTEAM -> DEEP MILK CLEAN.
Follow the steps of the self-cleaning process to
clean the milk system.
Disassemble the milk container (Fig. 20) and
push out the ball using the pin of the milk tube
(Fig. 21). Clean all parts of the milk container
under the tap or in the dishwasher.
Remove the HygieSteam container from the
machine (Fig. 22) and remove the HygieSteam
cover (Fig. 23). Clean the HygieSteam container
and cover under the tap or in the dishwasher.
Let the container and cover air-dry and place
them back into the machine.