Table of Contents
Advertisement
Figure 9. 2.5-inch drive chassis front I/O module
Figure 10. 3.5-inch drive chassis front I/O module
Power button/LED (green)
1
Drive activity LED (green)
2
Network activity LED (green)
3
1
Power button/LED (green)
Press this button to turn the server on and off manually. The states of the power LED are as follows:
Status
Off
Fast blinking (about
four flashes per
second)
Slow blinking (about
one flash per second)
Solid on
2
Drive activity LED (green)
The drive activity LED indicates the following status:
• The LED is lit: the drive is powered, but not actively reading or writing data.
• The LED is flashing: the drive is being accessed.
3
Network activity LED (green)
The network activity LED helps you identify the network connectivity and activity.
Description
Color
Power is not present, or the power supply has failed.
None
• The server is off, but the XClarity Controller is initializing, and the server is not
ready to be powered on.
Green
• System board power has failed.
The server is off and is ready to be powered on (standby state).
Green
The server is on and running.
Green
System ID button/LED (blue)
4
System error LED (yellow)
5
Chapter 2
.
Server components
25
Advertisement
Table of Contents
