Agc (Auto Gain Contorl) - Omron GigE Vision STC-BBS1242POE-BC Product Specifications And User's Manual

AGC (Auto Gain Contorl)

The brightness of image maintains to keep target brightness with gain automatically.
If the brightness of image is darker than target brightness, gain increases up to "GainAutoLimitMax".
If the brightness of image is brighter than target brightness, gain decreases down to "GainAutoLimitMin".
GenICam Parameters
GainSelector
Gain [GainSelector]
GainAuto
[GainSelector]
GainAutoLimitMin
[GainSelector]
GainAutoLimitMax
[GainSelector]
STC-BxS1242POE-BC / STC-BxS1242GE-BC
Product Specifications and User's Guide
IEnumeration Type Adjustable gain selection
Selected gain can be adjusting by Gain [GainSelector].
Please select "AnalogAll" when AGC is turned on.
Selection: "AnalogAll" (analog gain) and "DigitalAll" (digital gain)
Default: "AnalogAll"
IFloat Type Gain
Selected gain at "GainSelector" is adjusting
Analog gain:
Range: 0 to 212
Default: 0
Digital gain:
Range: 0 to 255
Default: 0
Analog gain cannot adjustable when AGC is turned on.
IEnumeration Type AGC ON / OFF selection
Selection: "ON" (Continuous) and "OFF" (Off)
Default: OFF
IFloat Type Minimum gain for AGC
Range: 0 to 212
Default: 0
This cannot be set greater than "GainAutoLimitMax"
IFloat Type Maximum gain for AGC
Range: 0 to 212
Default: 212
This cannot be set smaller than "GainAutoLimitMin"
No.21S075-01
43/73