ZyXEL Communications P-660HW-61 Release Note page 14

ZyXEL Confidential
Symptom :Index of menu1 Domain Name display error： (2) the symbol of ' ,' can not
work.
Conditon: N/A
2[BUG FIXED]
Symptom:QoS criteria violation. Do not comply with the rule: Priority(CBR) >
Priority(VBR) > Priority(UBR)
Conditon:N/A
3[BUG FIXED]
Symptom: Bug fixed incompletely. eWC NAT/ full feature/ edit details needn't apply but
save successfully.
Conditon: N/A
4[BUG FIXED]
Symptom: The router incorrectly leasing static DHCP address to the wrong
computers.
Condition:
1. Go to Advanced Setup>LAN>Static DHCP and configure the first rule
with the MAC address of workstation 1 and the IP Address 192.168.1.33.
2. Attach workstation 2 to the router. It will get the 192.168.1.33
address.
3. Attach workstation 1 to the router. It will fail to get an IP
address from the router.
5[BUG FIXED]
Symptom: Wan Backup Help message window is wrong.
Condition: N/A
6[BUG FIXED]
Symptom : There is a CI command set "wan adsl errorsecond xxx" doesn't work in TI
platform.
Condition: N/A
7[BUG FIXED]
Symptom :Menu 15.1 the info "Enter Menu selection number" is showed duplicate.
Condition: N/A
8[BUG FIXED]
Symptom: eWC will hang when UPNP feature of our device is enabled.
Condition:(1) install windows xp service packet 2 in PC
(2)enable firewall of windows xp and also enable UPNP
framework pass through or disable firewall of windows XP.
(3) login in P660HW via eWC and enable UPNP, eWC will not be
able to access.
(4)the bug doesn't occur every time, but most time it will
occur.
9[BUG FIXED]
Symptom: Use CI command "wlan association" to show association list, it will cause
340PE10C0.doc
14/42