ZyXEL Communications P-660HW-61 Release Note page 10

ZyXEL Confidential
1 change to FCS
Modifications in V 3.40(PE.8)b2| 12/17/2004
1. [BUG FIXED]
Symptom: When the PC is being connected to DUT through wireless, reboot system,
the DUT will crash.
Condition: Step1: PC(install SP2) is being connected to DUT through wireless.
Step2: At this time, reboot system
Step3: DUT will crash.
2. [BUG FIXED]
Symptom: The "Back" button in Wireless-MAC filter can't work correct.
Condition: 1.in GUI, Advanced Setup-Wireless LAN-MAC Filter, change some
setting 2.click Back button, the DUT can save it successfully.
3. [BUG FIXED]
Symptom:
our WLAN device should disallow the client with MAC "00:00:00:00:00:00" when
user define only allowed MAC (ex. only "01:02:03:04:05:06" can access) via MAC filter
Condition:
Take one B220 for example, its MAC is "00:A0:C5:43:FD:C5".
1. Add one allowed MAC filter to "01:02:03:04:05:06" on device via SMT menu 3.5.
2. The B220
MAC "01:02:03:04:05:06" to access.
3. Modify B220's MAC to "00:00:00:00:00:00".
4. Then you find B220 can access device.
The WLAN client is possible to change its MAC address to "00:00:00:00:00:00".
Customer hope our devices should not allow the MAC like 00:00:00:00:00:00 by
default.
4. [BUG FIXED]
Symptom: anyip can't inactive in eWC immediately
Condition: step1 in eWC active anyip it can work
step2 when inactive anyip it can still work but in SMT don't have problem
5. [Feature Enhancement]
support wlan auto security key lenghth 0-8.
Change name to OTIST
Add help page.
6. [BUG FIXED]
Symptom: IP source address become zero in WAN side.
Condition: IP source address is translated to zero by NAT, if
destination IP address is multicast group.
7 [BUG FIXED]
Symptom: The natSetSessionPerHostForIface() causes excetion
Condition: due to the NULL pointer access. The st_p will become NULL in some
case.
8 [BUG FIXED]
Symptom: vc hunt can not alloc mbuf again when vc hunt table is more than 8
340PE10C0.doc
cannot access to
10/42
the device because it only allow