ZyXEL Communications P-660HW-61 Release Note page 12

ZyXEL Confidential
Symptom: WE delete menu4 the system do reboot while VC hunt function enable,
system reboot.
Condition: Delete SMT>> menu 4, then configure menu11, when connecting to
DSLAM with VC hunt function enable, system will reboot.
8. [BUG FIXED]
Symptom:The SIP ALG has some problem, some fields in SIP message do not
translated by ALG.
Condition:N/A
9. [BUG FIXED]
Symptom: CPU loading will reach to 100% easily with multiple PVCs in bridge mode.
Condition: Under heavy downstream traffic with multiple PVCs in bridge mode.
10. [BUG FIXED]
Symptom: the Content filter function can not work
Condition: if we key in capital letter . Such as "yahoo" is keyed as "Yahoo""
11. [BUG FIXED]
Symptom :Traffic redirect can't work properly
Condition: In Dsl link mode when We set Enet encap mode.
12. [BUG FIXED]
Symptom:In smt 3 2 ,when we change nothing but it still save to romfile.
Condition: we change nothing in smt menu 3-2
13. [BUG FIXED]
Symptom:Ippr will not be active.
Condition: we have set IPPR rule in menu 25 and apply it in menu 3-2 ,and then reboot
device.
14. [BUG FIXED]
Symptom: PPPoE Pass through under Wireless function can not work.
Condition:N/A
15 . [BUG FIXED]
Symptom: Sometime the status keep in N/A and can't dial again in PPPoA or PPPoE
mode
Condition: while we changed PPPoA or PPPoE setting several times like statin IP <->
Dynamic IP , Idle time out <-> Nailed , VC<-> LLC . --> The device must reboot just can
work again
16[ BUG FIXED]
Symptom: device will crash
Condition: if PPPOE server use Password Authentication Protocol and then our device
will receive a packet PAP_ACK or PAP_NAK which data field is NULL
17[BUG FIXED]
Symptom: PPPOE pass-through work not properly
Condition: When we set PPPoE pass-through in Menu 11.8, the LAN side PC can
dymanic get the IP address, but can not get reply from ping the LAN IP address
18[BUG FIXED]
Symptom: user can access some html page without user name and password
340PE10C0.doc
12/42