ZyXEL Communications P-660HW-61 Release Note page 13

ZyXEL Confidential
Condition:N/A
19[BUG FIXED]
Symptom: Device will Crash
Condition: In smt ,ip ping and Ctrl+c repeat quickly
20[BUG FIXED]
symptom: In eWC, config a server when select NAT Full Feature. the server set in smt
and the one in eWC are different.
Condition:
condition1
step 1: In eWC, Advanced Setup--->NAT--->Full Feature--->Edit Details.
step 2: Click one of the rules.
step 3: Select "Type" as Server, input the Globe IP and select a Server Mapping Set
(2~10) such as 4.
step 4: Click "Edit Details" into the Server Set, config and save.
step 5: Go to SMT---> menu 15.2, we will find Server Set 4 has no information we
configged in eWC, the information was stored in Server Set 1 which is special for SUA.
condition2
step 1: In eWC, Advanced Setup--->NAT--->Full Feature--->Edit Details.
step 2: Click one of the rules.
step 3: Select "Type" as Server, input the Globe IP and select a Server Mapping Set
(2~10) such as 4.
step 4: Click "Apply" to save it.
step 5: Again enter the rule, click "Edit Details" into the Server Set, config and save.
step 6: Go to SMT---> menu 15.2, we will find Server Set 4 has no information we
configged in eWC, the information was stored in Server Set 5 which was not configged in
eWC ever.
21[BUG FIXED]
symptom: the old routing entry is still exsit.
Condition: if we set a staic ip then routing table will add one , but when we change this
static ip , we found the old routing entry is still exsit.
22．[Feature Enhancement]
IP Policy Router
23. [ Feature Enhancement]
Up grade TI WLAN Driver to APDK 5.2.2.22 and Accommodate 4x Mode
24. [Feature Enhancement]
Triple Play-Port Base Policy
25. [Feature Enhancement]
Support wlan auto security
26. [Feature Enhancement]
Support pass phrase.
Modifications in V 3.40(PE.7)C0| 09/29/2004
1 Change to FCS.
Modifications in V 3.40(PE.7)b3| 09/20/2004
1[BUG FIXED]
340PE10C0.doc
13/42