Summary: Packet Statistics - ZyXEL Communications NBG-416N User Manual

Table 5 Summary: DHCP Table (continued)
LABEL
MAC Address This field shows the MAC address of the computer with the name in the
Refresh

3.5.3 Summary: Packet Statistics

Click the Packet Statistics (Details...) hyperlink in the Status screen. Read-
only information here includes port status, packet specific statistics and the
"system up time". The Poll Interval(s) field is configurable and is used for
refreshing the screen.
Figure 8 Summary: Packet Statistics
The following table describes the labels in this screen.
Table 6 Summary: Packet Statistics
LABEL
Port
Status
TxPkts
RxPkts
Collisions
NBG-416N User's Guide
DESCRIPTION
Host Name field.
Every Ethernet device has a unique MAC (Media Access Control) address
which uniquely identifies a device. The MAC address is assigned at the
factory and consists of six pairs of hexadecimal characters, for example,
00:A0:C5:00:00:02.
Click Refresh to renew the screen.
DESCRIPTION
This is the NBG-416N's port type.
For the LAN ports, this displays the port speed and duplex setting or
Down when the line is disconnected.
For the WAN port, it displays the port speed and duplex setting if
you're using Ethernet encapsulation and Idle (line (ppp) idle), Dial
(starting to trigger a call) and Drop (dropping a call) if you're using
PPPoE or PPTP encapsulation. This field displays Down when the line
is disconnected.
For the WLAN, it displays the maximum transmission rate when the
WLAN is enabled and Down when the WLAN is disabled.
This is the number of transmitted packets on this port.
This is the number of received packets on this port.
This is the number of collisions on this port.
Chapter 3 The Web Configurator
33