Back To Factory Defaults; Restart Screen - ZyXEL Communications NBG-416N User Manual

Chapter 17 Tools
If the upload was not successful, the following screen will appear. Click Return to
go back to the Configuration screen.
Figure 87 Configuration Restore Error

17.4.3 Back to Factory Defaults

Pressing the Reset button in this section clears all user-entered configuration
information and returns the NBG-416N to its factory defaults.
You can also press the RESET button on the rear panel to reset the factory
defaults of your NBG-416N. Refer to
information on the RESET button.

17.5 Restart Screen

System restart allows you to reboot the NBG-416N without turning the power off.
Click Maintenance > Tools > Restart. Click Restart to have the NBG-416N
reboot. This does not affect the NBG-416N's configuration.
Figure 88 Maintenance > Tools > Restart
138
Section 3.3.1 on page 27 for more
NBG-416N User's Guide