Removing Msc And Line Cards; Figure 9 Tightening Card Thumbscrews - ZyXEL Communications IES-5000 Series User Manual

IES-5000 Series User's Guide

Figure 9 Tightening Card Thumbscrews

3.3.2 Removing MSC and Line Cards

1 Disconnect all cables from the card.
2 Loosen the two thumbscrews.
3 Pull the two ejector levers firmly until the front of the card is clear of the chassis. Pull the
ejector levers until they are perpendicular to the front panel.
4 Grasp the center of the front panel of the card with one hand and place the other hand
under the card to support it.
5 Slide the card out of the slot.
32 Chapter 3 Hardware Installation and Connections