IES-5000 Series User's Guide
This table describes the IES-5000 splitter chassis dimensions and weight (excluding card
weights)
Table 3 Splitter Chassis Dimensions and Weights (Without Cards)
CHASSIS
IES-5000ST Chassis 440 mm (W) x 280 mm (D) x 240 mm (H)
IES-5005ST Chassis 440 mm (W) x 280 mm (D) x 125 mm (H)
2.1.3 Wire Gauge Specifications
This table describes the wire gauge specifications of the IES-5000.
Table 4 Wire Gauge Specifications
WIRE TYPE
Ground Wire
Telephone Wire
Power Wire
AWG (American Wire Gauge) is a measurement system for wire that specifies its thickness.
As the thickness of the wire increases, the AWG number decreases.
2.1.4 Power Specifications
This table describes the maximum power consumption of the IES-5000.
Table 5 Power Specifications
UNIT
IES-5000M Chassis 700
IES-5005M Chassis 350
Use a –48 VDC power source with 700 W minimum output for the IES-5000M or 350 W
minimum output for the IES-5005M. See
2.1.5 Operating Environment
• Temperature: 0°C ~ 50°C
• Humidity: 5% - 95% (non-condensing)
2.1.6 Storage Environment
• Temperature: -40°C ~ 70°C
24
DIMENSIONS
REQUIRED AWG NO.
(DIAMETER)
12 or larger
26 or larger
12 or larger
CONSUMPTION IN WATTS
Section 2.3 on page 26
WEIGHT
10.4 kg
6.6 kg
VOLTS DC
AMPS
-48 to -60
20
-36 to -72
10
for more information.
Chapter 2 Unit Data