Table of Contents
Advertisement
3.5 Configuring IP Address
The Industrial 10G Managed Media Converter is shipped with default IP address shown below:
IP Address: 192.168.0.100
Subnet Mask: 255.255.255.0
To check the current IP address or modify a new IP address for the Media converter, please use the procedure as follows:
Display of the Current IP Address
At the "#" prompt, enter "show ip".
1.
The screen displays the current IP address shown in Figure 3-5.
2.
3.6 Web Management
The Industrial 10G Managed Media Converter offers management features that allow users to manage the Industrial 10G
Managed Media Converter from anywhere on the network through a standard browser such as Microsoft Internet Explorer. After
you set up your IP address for the Industrial 10G Managed Media Converter, you can access the Industrial 10G Managed Media
Converter's Web interface applications directly in your Web browser by entering the IP address of the Industrial 10G Managed
Media Converter.
You can then use your Web browser to list and manage the Industrial 10G Managed Media Converter configuration parameters
from one central location, just as if you were directly connected to the Industrial 10G Managed Media Converter's console port.
Web Management requires either the latest version of a modern web browser, such as Google Chrome, Mozilla Firefox,
Microsoft Edge, or Apple Safari,
The following web screen uses IXT-900-2X1UP as a representative.
Figure 3-5: IP Information Screen
Figure 3-6: Web Management Connection
36
User's Manual of IXT-900 PoE series
Advertisement
Table of Contents
