1.4 Product Features
Physical Port
One 10G/5G/2.5G/1G/100BASE-T RJ45 interface with auto MDI/MDI-X function
One (Two) 10G/2.5G/1G/100BASE-X SFP+ interface
Supports IEEE 802.3bt PoE++ standard
IEEE 802.3bt Power over Ethernet
Compliant with IEEE 802.3bt Type-4 PoE++ standard
Backward compatible with IEEE 802.3af/at PD device
The RJ45 port on the IXT-900 PoE series delivers a maximum power output of 95 watts, which is also the maximum
PoE budget the device can provide.
Detects powered devices (PD) automatically.
Power feeding up to 100m
PoE management features
PoE admin-mode control
-
PoE port power limit
-
PD classification detection
-
Intelligent PoE features
Temperature threshold setting
-
PoE usage threshold setting
-
PD alive check
-
PoE schedule
-
Layer 2 Features
Storm Control support
− Broadcast / Multicast / Unknown Unicast
Supports VLAN
− IEEE 802.1Q tagged VLAN.
− Supports provider bridging (VLAN Q-in-Q, IEEE 802.1ad)
− Up to 256 VLAN groups, out of 4096 VLAN IDs
Supports ITU-T G.8032 ERPS ring with recovery time less than 500ms (software-based)
Link Layer Discovery Protocol (LLDP)
16K MAC address table with auto-aging
Jumbo Frame support up to 9K in size.
Quality of Service
Ingress Shaper and Egress Rate Limit per port bandwidth control
8 priority queues on all converter ports
Strict priority and Weighted Round Robin (WRR) CoS policies
Traffic classification
− IEEE 802.1p CoS
− IP TOS / DSCP / IP Precedence
− IP TCP/UDP port number
−
Typical network application
User's Manual of IXT-900 PoE series
16