Table of Contents
Advertisement
2 Select the scene for adding special effects and
press the MENU button.
The Disc Navigation menu screen will appear.
2 Use
the
joystick
to
choose, "Scene", "Edit",
"Fade", and then press
the ►/11 button.
The fade setting screen
will appear.
The options will appear
under IN and OUT: The
□ mark will be attached
to the currently selected
option.
^ Use the joystick to select
the special effects for
"IN" and "OUT", choose
"Enter", and then press
the ►/! I button.
After the proceeding message appears, the
thumbnail display screen will be restored.
The scenes for which special effects have been
set will be attached with marks "
"E\.
"In" effect
"Out" effect
Note: Setting fade will also fade the sound.
Note: Fading can also be set to either "IN" or
-our.
Note: Any registered fade can be changed at
any time using the same procedure as above.
Note: Fade can also be added to on-screen in¬
formation displayed during playback.
Note: If the playback time of scene is short, fade
will cut off midway.
Note: If you set fade-in and fade-ouf to a still im¬
age or a movie with recording time of no more
than 3 seconds.only fade-in will be valid.
Note: No fade effect will operate if you start play¬
back in the recording pause status.
Note: If you locate the start of a scene by skip¬
ping. the image at the start of the scene will ap¬
pear for a moment,and then fade will operate.
Note: The fade effect will not function during
frame advance, frame back, slow playback or
search playback.
Note: Pressing the □ button on the screen for veri¬
fication will restore the thumbnail display screen.
80
Advertisement
Table of Contents
