Table of Contents
Advertisement
Inserting and Ejecting Disc r--
...
■
Inserting Disc ■"
~
'
-- -■■
■ ■ ^rrr=..... —rrrr—;
With this DVD video camera/recorder the recorded video and audio are stored on DVD-RAM* or DVD-R disc.
* When using an uninitialized DVD-RAM disc, it must be formatted (see p. S5),
^ Make sure that the
DVD video camera/
recorder is turned off.
Set the power switch to
"POWER OFF".
Power switch
2 Press down the DISC
EJECT button.
The cover of disc
insertion block (hand
strap) will slightly
open.
^ Gently open the
cover by hand
until it stops.
^ Insert the disc, in cartridge or caddy, into the
disc guide.
Set a both-side recordable disc into the disc guide
so that the label of side on which you want to
record faces the hand strap.
How to set both-side recordable disc
• The actual recording surface of side IA1 is op¬
posite to that on which "SIDE A" is marked. If
you view the image recorded on side |A] on
another device, set the disc in it with indica¬
tion "SIDE A" facing up.
• The cartridge has
a
fixed orientation when it
is inserted into the DVD video camera/re¬
corder: Insert it correctly referring to the illus¬
tration shown below.
To record on side [B], turn the cartridge over.
How to set one-side recordable disc
• Set the disc with the label side up in the caddy,
and then insert the caddy correctly referring
to the illustration shown below.
The caddy has a ► mark: Insert it with this
mark forward.
36
Advertisement
Table of Contents
