Table of Contents
Advertisement
• Recordable times in each movie
quality mode (on one side of disc)
Quality
mode
Disc used
DVD-RAM
DVD-R
XTRA*
approx. 18-60 min |
—
FINE
approx. 30 min
approx. 30 min
STD
approx. 60 min
approx. 60 min
LPCM
—
! approx. 30 min
The recordable times are only for reference.
* The recordable times will vary depending on
recording contents.
Note: When using DVD-R disc, you cannot switch
the movie quality mode during recording on the
disc: The DVD video camera/recorder will be au¬
tomatically set to the quality mode first used with
the disc for recording.
Note: The setting of movie quality mode is effec¬
tive only during movie recording: Switching the
mode will not work during still recording.
Input Selection
c
DftBTR
D
If you wish to input an image from another device to this DVD video camera/recorder, you must first
switch the setting on the DVD video camera/recorder.
Refer to the explanation starting from page 90 on how to connect the DVD video camera/recorder to
other devices or record images input from them.
CAMERA
Usually select this option.
LINE
To view image from another device on this DVD video camera/recorder
^ Press the MENU button in the recording pause
status.
The menu screen will appear.
2 Use the joystick to choose "Input Source" on the
"Record Functions Setup" menu screen, and
then press the^/ll button.
The options will appear on the right of "Input
Source": The □ mark will be attached to the cur¬
rently selected option.
*
^ Select the desired option
and then press the ►/11
button: The selected op¬
tion will be set.
^ Press the MENU button.
Note: The "Input Source" setting will return to
"CAMERA" whenever the DVD video camera/re¬
corder is turned off,
57
Advertisement
Table of Contents
