Table of Contents
Advertisement
Message
Cause & Troubleshooting
Reference
page
Cannot move scene in
program mode.
Move was executed when a program was selected.
70
(1) Disc is not format¬
ted. If it formats, it be¬
comes possible to use
for camera.
(2) However, when you
record from PC con¬
nection
terminal,
please do not format.
(3) Format the disc
now?
DVD-R disc that was not initialized for camera use was
inserted.
37
In DVD-R Disc. Video
mode of the disc re¬
corded once cannot
be changed.
With DVD-R disc, the movie quality mode once used
for recording cannot be changed.
56
Finalize may not be
complete.
Finalize
again now?
Instantaneous shutoff occurred during finalizing, after
which power was supplied and disc was inserted.
87
Disc error has oc- !
curred. Finalizing is not
complete.
Disc error occurred during finalizing,and finalizing failed.
Replace the disc.
87
Scenes over Irmit.Can-
not move scenes.
An attempt was made to move a scene, even though
number of storable scenes was exceeded.
66,82
Top scene cannot be
divided.
Division is not possible at the start of scene.
81
End scene cannot be
divided.
Division is not possible at the end of scene.
81
Photo cannot be di¬
vided.
Still image cannot be divided.
82
Cannot
combine
scene.
Unless consecutive scenes are selected, they cannot
be combined.
81
Same scenes on Play
List will be deleted.
Delete scenes?
This will appear when scenes are to be deleted.
78
This disc is recorded by
the PAL system. Please
replace disc.
This DVD video camera/recorder can use only discs re¬
corded on the NTSC system. A disc recorded on the
PAL system cannot be used on this DVD video cam¬
era/recorder.
—
This disc cannot be
used. Please replace
disc.
A disc that cannot be used on this DVD video cam¬
era/recorder has been loaded. Check the type of disc.
22
100
Advertisement
Table of Contents
