Call Hold Setup - ZyXEL Communications P-2602R-D1A Support Notes

perform specific actions on calls from specific numbers. If a caller's number
Setup
does not match the Incoming Call Number of any of these entries, the
Prestige performs the default action configured in the Forward to Number
Setup section.
Activate Select this check box to turn on an call forwarding entry.
Incoming Call You can set the Prestige to take a particular action on incoming calls from a
Number number that you specify here.
Forward to You can set the Prestige to forward incoming calls to a number that you
specify here.
Number
Condition Select under what circumstances you want the Prestige to use this call
forwarding entry.
Select Unconditional to have the Prestige immediately forward any calls
from the number specified in the Incoming Call Number field to the
number in the Forward to Number field.
Select Busy to have the Prestige forward any calls from the number
specified in the Incoming Call Number field to the number in the Forward
to Number field when your SIP account has a call connected.
Select No Answer to have the Prestige forward any calls from the number
specified in the Incoming Call Number field to the number in the Forward
to Number field when the No Answer Waiting Time period expires
(whether or not the no answer feature is enabled in the Forward to
Number Setup section).
Select Block to have the Prestige reject calls from the number specified in
the call forwarding entry.
Select Accept to have the Prestige allow calls from the number specified in
the Incoming Call Number field.

Call Hold setup

Prestige allows user agent to interrupt communications on an existing call.
All contents copyright (c) 2007 ZyXEL Communications Corporation.
Prestige 2602R-D1A Support Notes
111