ZyXEL Communications P-2602R-D1A Support Notes page 92

Prestige 2602R-D1A Support Notes
Note: You should have a voice account already set up and have VoIP information from your VoIP service
provider prior to configure SIP account on to the unit.
With the account information your ISP provider provided now you may start.
Step 1. Open the web browser from your workstation to connect to the Prestige by entering the Management IP
address of the Prestige (LAN IP address). The default management IP of Prestige is 192.168.1.1.
Step 2. Enter the administrator password appear on the page of login and click on login. The default is '1234'
Step 3. On the left column click on VoIP to bring you to VoIP configuration menu than click on SIP. While in
the SIP Settings page use the account selector on upper right of the page to select the SIP account you will like
to configure.
Step 4. Check active sip box if you like to use this account and fill in the account information the ITSP
provided you in the SIP setting category. Which will normally include you SIP number, SIP local port, SIP
server address, SIP server port, Register server port, Register server address, SIP service domain.
92
All contents copyright (c) 2007 ZyXEL Communications Corporation.