ZyXEL Communications P-2602R-D1A Support Notes page 99

To configure the phone port setting, please follow the below step.
Step 1. Open the web browser from your workstation to connect to the Prestige by entering the Management IP
address of the Prestige. The default management IP of Prestige is 192.168.1.1.
Step 2. Enter the administrator password appear on the page of login and click on login. The default is '1234'
Step 3. On the left column click on VoIP -> Phone -> Analog Phone -> Advanced Setup to bring you to voice
function menu.
Step 4. Change the phone port parameter as you desired and click Apply when you are finish to save and let the
setting to take effect.
Each field's detail description is listed below.
Label Description
Speaking Use this field to set the loudness that the Prestige uses for the speech signal
Volume that it sends to the peer device. -1 is the quietest and 1 is the loudest.
Listening Use this field to set the loudness that the Prestige uses for the speech signal
Volume that it receives from the peer device and sends to your phone. -1 is the
All contents copyright (c) 2007 ZyXEL Communications Corporation.
Prestige 2602R-D1A Support Notes
99