ZyXEL Communications Prestige P660RU-T1 Firmware Release Notes page 22

ZyXEL Confidential
server
stats
table
httpd
debug
icmp
echo
data
status
trace
discovery
ifconfig
ifdrop
ping
pong
extping
route
status
add
addiface
addprivate
drop
flush
lookup
errcnt
status
adjTcp
udp
status
340ST5C0.doc
name <hostname> [timeout]
status
table
<primary> [secondary] [third]
clear
disp
[on|off]
[on|off]
<option>
[on|off]
<iface> [on|off]
[iface] [ipaddr] [broadcast <addr>
|mtu <value>|dynamic]
<iface>
<hostid>
<hostid> [<size> <time-interval>]
<target address>
[-t]
[-c]
[-d] [Data]
[-f]
[-l] [Data size]
[-v] [TOS value]
[-n] [Repeat value]
[-w] [Timeout value]
[-o] [IP address/IFace]
[-p] [Min MTU] [Max MTU]
[Interval size]
[if]
<dest_addr|default>[/<bits>]
<gateway> [<metric>]
<dest_addr|default>[/<bits>]
<gateway> [<metric>]
<dest_addr|default>[/<bits>]
<gateway> [<metric>]
<host addr> [/<bits>]
<addr>
disp
clear
<iface> [<mss>]
22/25
resolve name to ip-addr
display dns query status
display dns query table
set dns server
clear dns statistics
display dns statistics
display dns table
set http debug flag
set icmp echo response flag
select general data type
display icmp statistic counter
turn on/off trace for debugging
set icmp router discovery flag
configure network interface
chaek if iface is available.
ping remote host
pong remote host
Continue to send ECHO_REQ until Ctrl-C input
Validate the reply data
Data pattern. The maximum length of data is 255
characters.
Set DF flag.
Datagram size in bytes (with 28 bytes Header).
Specify the value of TOS flag.
The number of times to send ECHO_REQ
packet.
Specify the value of Timeout in seconds.
To specify one IP address or interface to be the
Source IP address.
Sweep range of sizes.
display routing table
add route
add an entry to the routing table to iface
add private route
drop a route
flush route table
find a route to the destination
display routing statistic counters
clear routing statistic counters
display ip statistic counters
adjust the TCP mss of iface
display udp status