ZyXEL Communications P-2302R-P1C Firmware Release Notes page 20

ZyXEL Confidential
Subject <mail
subject>
attack send-alert
<yes|no>
block <yes|no>
block-minute
<0~255>
minute-high
<0~255>
minute-low
<0~255>
max-incomplete
-high <0~255>
max-incomplete
-low <0~255>
tcp-max-incomp
lete <0~255>
set name <desired
<set#> name>
default-permit
<forward|block
>
icmp-timeout
<seconds>
udp-idle-timeo
ut <seconds>
connection-tim
eout <seconds>
fin-wait-timeo
ut <seconds>
tcp-idle-timeo
360AUG0C0.rtf
Edit the email subject
Activate or deactivate the firewall DoS
attacks notification emails
Yes: Block the traffic when exceeds the
tcp-max-incomplete threshold
No: Delete the oldest half-open session
when exceeds the tcp-max-incomplete
threshold
Only valid when sets 'Block' to yes. The
unit is minute
The threshold to start to delete the old
half-opened sessions to minute-low
The threshold to stop deleting the old
half-opened session
The threshold to start to delete the old
half-opened sessions to
max-incomplete-low
The threshold to stop deleting the
half-opened session
The threshold to start executing the block
field
Edit the name for a set
Edit whether a packet is dropped or
allowed when it does not match the default
set
Edit the timeout for an idle ICMP session
before it is terminated
Edit the timeout for an idle UDP session
before it is terminated
Edit the wait time for the SYN TCP sessions
before it is terminated
Edit the wait time for FIN in concluding
a TCP session before it is terminated
Edit the timeout for an idle TCP session
20/35