Table of Contents
Advertisement
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the
memory
module.
4. Remove the
solid-state
5. Remove the
wireless
card.
6. Remove the speakers.
7. Remove the fan.
8. Remove the battery.
9. Remove the
heat
sink.
10. Remove the
touchpad
11. Remove the
I/O-board
12. Remove the
display
assembly.
13. Remove the
I/O
board.
14. Remove the
power button
15. Remove the
power-adapter
16. Remove the
system
board.
NOTE:
The system board can be removed with the heat sink attached to it in order to simplify the procedure and
preserve the thermal bond between the system board and heat sink.
About this task
NOTE:
The palm-rest and keyboard assembly cannot be further disassembled. If the keyboard is malfunctioning and is
required to be replaced, replace the entire palm-rest and keyboard assembly.
The image below shows the palm-rest and keyboard assembly after the pre-requisite procedures have been performed.
Figure 45. Removing the palm-rest and keyboard assembly
Before working inside your
drive.
assembly.
cable.
or the
power button with optional fingerprint
port.
computer.
reader, whichever is applicable.
Removing and installing Field Replaceable Units (FRUs)
87
Advertisement
Table of Contents
