Planar Simplicity M Series User Manual page 69

Ethernet

Ethernet
o Enable the network interface
o Options: Disable, Enable
o Default: Disable

Static IP
o Enable dynamic IP mode or configure the static IP settings of the display's
Ethernet port.
o Options: Disable (use DHCP), Enable (use static IP)
o Default: Disable

IP Address
o The IP address used by the display's network interface.
o Configurable if Static IP is enabled.

Gateway
o The default gateway used by the display's network interface.
o Configurable if Static IP is enabled.

Netmask
o The subnet mask used by the display's network interface.
o Configurable if Static IP is enabled.

DNS 1
o The address of the primary DNS server used by the display's network interface.
o Configurable if Static IP is enabled.

DNS 2
o The address of the secondary DNS server used by the display's network
interface.
o Configurable if Static IP is enabled.
Planar Simplicity M Series User Manual
020-1429-00A
Operating the Display
Page | 69