Planar Simplicity M Series User Manual page 52

Custom Zoom

Zoom
o Adjust the zoom (overscan) of the image. Available when Aspect Ratio is set to
Custom. Press
o Range: 0~100
o Default: 0

H Zoom
o Adjust the zoom (overscan) of the image in the horizontal direction only.
Available when Aspect Ratio is set to Custom. Press
desired level.
o Range: 0~100
o Default: 0

V Zoom
o Adjust the zoom (overscan) of the image in the vertical direction only. Available
when Aspect Ratio is set to Custom. Press
o Range: 0~100
o Default: 0

H Position
o Adjust the horizontal position of the image (VGA source only). Available when
Aspect Ratio is set to Custom. Press
o Range: 0~100
o Default: 50

V Position
o Adjust the vertical position of the image (VGA source only). Available when
Aspect Ratio is set to Custom. Press
o Range: 0~100
o Default: 50
Auto Adjust

Force the display to reacquire and lock to the input signal (VGA source only). This is
useful when the signal quality is marginal.

Note: This feature does not continually reacquire the signal.
Screen Reset

Reset all settings in the Screen menu to their default values.
Planar Simplicity M Series User Manual
020-1429-00A
 
or to select the desired level.


Operating the Display
 
or to select the
 
or to select the desired level.

or to select the desired level.

or to select the desired level.
Page | 52